HITEC multi charger X4 AC Plus Mode D'emploi page 26

Content
1. Introduction ........................................................... 26
1.1. Warnings and Safety Information ........................... 27
1.2. Guarantee and limitation of liability ...................... 29
1.3. CE Conformity Declaration .................................... 29
1.4. Disposal Notes ....................................................... 29
2. Package Contents .................................................. 30
2.1. Recommended Accessories .................................... 30
2.2. Specifi cations ......................................................... 31
2.3. Charger Layout ...................................................... 31
3. Special Features ..................................................... 33
4. Powering the Charger ............................................ 34
4.1. Connecting the Battery .......................................... 34
4.2. Connecting the Balancer Socket ............................. 34
5. Program Flow Chart .............................................. 35
6. Default User Preferences Setup ............................. 36
1. Introduction
Congratulations on your purchase of the Hitec X4 AC Plus
Multi-Charger. You are now the owner of a compact multi
chemistry battery charger with battery management and
integral Lithium battery balancing features. The X4 AC Plus
features four totally independent and identical 50 watt
charging circuits for a total power of 200 watts. As a result,
it can simultaneously charge or discharge up to 4 separate
battery packs.
The X4 AC Plus can accept a variety of power inputs. The
charger features a built in 22 Amp power supply powered
by your standard 100-120 V AC household current or you
can attach it to a 12 Volt car battery or a 11 -15 V (20 amp
minimum) DC power supply.
26
Professional Balance Charger, Discharger
7. Charging Lithium Chemistry (LiPo/Li-lon/LiFe)
Type Batteries ........................................................ 39
7.1. Discharging Lithium Chemistry (LiPo/Lilo/LiFe)
Type Batteries ........................................................ 41
7.2. Error Message Display ............................................ 42
8. Charging NiCd or NiMH Batteries .......................... 42
8.1. Discharging NiCd or NiMH Batteries ...................... 43
8.2. Charge/Discharge Cycling of NiCd/NiMH
Batteries ................................................................ 43
9. Charging/Discharging Lead-Acid (Pb) Batteries ..... 44
9.1. Charging Lead Acid (Pb) Batteries ......................... 44
9.2. Discharging Lead Acid (Pb) Batteries ..................... 44
10. Program Display Information ................................. 45
11. Warning and Error Messages ................................. 46
12. Standard Battery Parameters ................................. 47
The Hitec X4 AC Plus is simple to use, but the operation of
a sophisticated automatie charger such as the X4 AC Plus
does require some knowledge and education by the user.
This instruction manual is designed to ensure that you can
quickly become familiar with the charger's functions and
capabilities.
It is important that you read this instruction manual
in its entirety before attempting to use your new X4
AC Plus chargers.