Safety Precautions; Explanation Of Symbols Used; Safety Hazards - Titan FastMelt 650 Mode D'emploi

SAFETY PRECAUTIONS

1
SAFETY PRECAUTIONS
1.1

EXPLANATION OF SYMBOLS USED

This manual contains information that must be read and
understood before using the equipment. When you come to
an area that has one of the following symbols, pay particular
attention and make certain to heed the safeguard.
 This symbol indicates a potential hazard
that may cause serious injury or loss of life.
Important safety information will follow.
This symbol indicates a potential hazard

to you or to the equipment. Important
information that tells how to prevent
Attention
damage to the equipment or how to avoid
causes of minor injuries will follow.
Danger of fire from flammable fumes and

liquids
Danger of explosion from flammable fumes

and liquids.
Danger of injury from coming into contact

with or the inhalation of hazardous vapors.

Danger of injury from burns.
i
Notes give important information which

should be given special attention.
4
1.2

SAFETY HAZARDS

HAZARD: GENERAL
This product can cause severe injury or property
damage.
PREVENTION:
•
Do not use equipment unless fully trained and qualified.
Our equipment should be used by professionals only.
•
Each person(s) involved with the operations, maintenance
and any other aspects of the equipment should read and
refer to this instruction manual, which explains some of the
basic information on how to safely operate and maintain
the equipment.
•
This equipment is sold with the understanding that it wil
be utilized solely for its intended purposes.
•
Do not change, alter, or adjust the equipment in any way.
If there is a performance problem with the equipment,
please contact our office for advice.
•
Peform regular checks and inspection of the equipment
and its components and parts. Follow the maintenance
instructions listed in this manual for care of the equipment.
Always replace worn or broken parts immediately.
- Use only manufacturer authorized parts. User assumes
all risks and liabilities when using parts that do not meet
the minimum specifications and safety devices of the
manufacturer.
•
Educate yourself on all fluids and chemicals used for the
machines. Use only materials that are compatible with the
equipment and read all product labels for solvents being
used before mixing.
•
Follow and enforce to all equipment operators any
local, state and national laws which may be applied. Be
informed of fire, electric and safety measures on all levels
of governement.
•
Wear personal protective wear (proper clothing, gloves and
eyewear, and respirator when necessary). Avoid breathing
chemical and fuel fumes.
•
Always perform random checks for fuel leaks and repair
immediately before attempting to use.
•
Do not leave kettle unattended when operating.
•
Do not operate the unit when fatigued or under the
influence of drugs or alcohol.
•
Keep a fire extinguisher in work area.
FastMelt