Table Des Matières - Titan FastMelt 650 Mode D'emploi

FastMelt
ORIGINAL OPERATING MANUAL
1 SAFETY PRECAUTIONS ___________________ 4
1.1 Explanation of symbols used _____________________4
1.2 Safety hazards ________________________________4
2 INTRODUCTION _________________________ 6
2.1 Instruction manual _____________________________6
2.2 Machine design _______________________________6
2.3 Before getting started __________________________6
2.4 Kettle installation ______________________________6
2.5 Propane gas connections _______________________6
2.6 Pre-operation check ____________________________6
3 OPERATION _____________________________ 7
3.1 Lighting pre-melter kettle burner _________________7
3.2 Thermoplastic material feed _____________________7
3.3 Engine operation ______________________________7
3.4 Hydraulic system ______________________________8
4 SHUTDOWN
4.1 Daily shutdown _______________________________8
4.2 Seasonal shutdown ____________________________8
5 MAINTENANCE __________________________ 9
5.1 Changing material colors or material resin types _____9
6 TITAN TERMS AND CONDITIONS _________ 10
WARRANTY _________________________________ 11
ACCESSORIES AND SPARE PARTS _____________ 32
Spare parts list for the main assembly __________________32
Spare parts list for the outer skin assembly _____________33
Spare parts list for the propane system _________________34
Spare parts list for the electrical system ________________35
Spare parts list for the hydraulic system ________________36
Spare parts list for the agitator and drive _______________37
Spare parts list for the drive and mount ________________38
CONTENTS
3