Timer Function; Child Safety Lock; Temperature Sensor - Spring 58 9625 25 01 Mode D'emploi

6.5.1

Timer function

1. Press the TIMER button (10).
2. Press the HR/MIN button (11) to activate setting of the hours and minutes. Press the + or – button (9) to select
the desired time.
You must select hours (0 – 24) and minutes (0 – 59); otherwise, the setting will not be saved.
Example: The appliance should switch off after 30 minutes. In this case select 00(HR):30(MIN).
The appliance should switch off after 1 hour. In this case select 01(HR):00(MIN).
3. After setting the time, the appliance automatically returns to power or temperature mode.
4. To delete the timer setting, press the TIMER button (10) and press and hold the HR/MIN button (11) for about
1-2 seconds.
6.5.2

Child safety lock

1. The child safety lock can be activated as soon as the appliance is connected to a power outlet, even if it is not
yet switched on. To activate the child safety lock, press and hold the LOCK button (13) for 3 seconds. LOCK
appears on the display.
2. When the child safety lock is activated, the appliance can still be switched off using the ON/OFF button (1).
3. Deactivate the child safety lock by pressing and holding the LOCK button (13) until the LOCK symbol no longer
appears on the display.
6.5.3

Temperature sensor

• For precise temperature monitoring the appliance is equipped with a temperature sensor. The position is marked
by a small circle on the glass ceramic surface.
• For optimal temperature monitoring the cookware must cover this circle. The induction cooktop display indicates
the current temperature of the food being cooked. For technical reasons it is possible that the displayed temperature
may not correspond 100% to the actual temperature (e.g. if the pot is nearly full). In this case the temperature
display can be adjusted as follows:
– Switch the induction cooktop on without cookware on the Ceran surface.
– Press and hold the TIMER button (10) for about 3 seconds. As soon as the word PROGR M flashes on the
display, the appliance is in temperature display setting mode.
– Press the + or – button (9) of the induction cooktop to set the displayed temperature precisely in a range
from -31°C to +31°C. We recommend using a kitchen thermometer to measure the temperature of the food
being cooked. Adjust the temperature display of the induction cooktop as follows:
If the temperature of the food is 5°C lower than displayed by the induction cooktop, set the display to -5.
If the temperature of the food is 5°C higher than displayed by the induction cooktop, set the display to +5.
– Save the set value by pressing the TEMP button (14) for about 3 seconds until the word PROGR M stops
flashing. The value is saved in the induction unit and will be used even after switching the appliance on and
off, until you recalibrate the temperature display.
– Press and hold the TIMER button (10) for about 3 seconds to return to the normal operating mode. You can
now place cookware on the induction cooktop.
• To reset the temperature display to +/- 0, enter setting mode and save the starting value 0 by pressing and holding
the TEMP button (14).
Note: The exact temperature is dependent on various factors. The temperature can vary depending on the food
being cooked and the cookware used. If necessary, recalibrate the appliance.
38