Function; Startup / Operation 58 9625 25 01 - Spring 58 9625 25 01 Mode D'emploi

Caution!
Heat grease or oil slowly and only under supervision to avoid overheating. Overheated oil/grease can
ignite spontaneously. Fire hazard. Do not extinguish burning oil/grease with water.
Caution !
If sugar or sugary foods melt on the glass ceramic surface, please remove immediately with a glass
ceramic surface scraper to prevent damage.
Caution !
Do not leave cookware on the induction cooktop unattended. The food could boil over and ignite.
Caution !
Do not touch the glass ceramic surface of the induction cooktop immediately after use. The residual heat
can cause burns!
Caution !
Do not place any other objects such as lids or kitchen utensils on the induction cooktop. When the
induction cooktop is switched on, they can heat up and cause burns.
6.1

Function

A high frequency induction coil (20-35 kHz) is located immediately beneath the glass ceramic surface. This heats
the cookware on the glass ceramic surface. The heat thus arises in the cookware. This makes it possible to cook
very efficiently, as there is little loss of heat between the induction cooktop and cookware.
Induction reacts immediately. The heat is there in seconds after the induction cooktop is switched on and is gone
just as quickly after it is switched off. This can be best compared with cooking on a gas stove.
6.2

Startup / Operation 58 9625 25 01

1. Plug the power cord of the induction cooktop into a suitable socket according to Chapter 14 Technical
Specifications.
2. Press the ON/OFF button (1) to switch on the appliance.
3. Use the power control knob (2) to select the desired power setting. The selected power is indicated on the display
(3). The higher the power, the more lamps light up. The COOK lamp (5) lights up, indicating that the appliance is
in cooking mode.
4. Place suitable cookware centred on the glass ceramic cooking surface, as described in Chapter 5. The HE TING
lamp (4) lights up when suitable cookware is detected and is being heated.
5. The desired power setting can now be adjusted by means of the power control knob (2) during cooking.
6. To keep food warm, switch to warming mode by pressing the HOLD button (7). The HOLD lamp (6) lights up,
indicating that the appliance is in warming mode.
7. The display (3) shows you the temperature at which the food is kept warm. Press the HOLD button (7) repeatedly
to select temperatures between.
8. To return to cooking mode, press the COOK button (8).
9. After use, switch off the appliance by pressing the ON/OFF button (1).
36