Hydraulic Connection - mundoclima Mupir-H9 Manuel D'installation

During the first months of use, your heat pump is subject to condensation. This will result
in water flows, more or less important depending on the moisture content, which will
gradually diminish.
To channel condensation flows, we recommend that you install our condensate drain kit.
For this purpose the heat pump must be raised by at least 10 cm.
How to install the condensate drain kit?
1. Install your heat pump by raising it by at least 10 cm using solid, moisture-resistant
studs.
2. Connect the exhaust hose to the drain hole located underneath the heat pump.

5.5 Hydraulic Connection

42