MultiSync LCD1990FXP Manuel D'utilisation page 21

Advanced OSM Controls
Tag 5 LED BRIGHTNESS
LED COLOR
SCREEN SAVER
MOTION
HOT KEY
FACTORY PRESET
Tag 6 LANGUAGE
OSM H.POSITION
OSM V.POSITION
OSM TURN OFF
OSM LOCK OUT
Controls the brightness of the LED on the front of the
monitor.
The LED on the front can be blue or green.
Use the SCREEN SAVER to reduce the risk of image persistence.
The screen image moves periodically in 4 directions to reduce
the risk of image persistence. The SCREEN SAVER can be set
to move the screen image in intervals ranging from 10 to 900
seconds, in 10-second increments.
When this function is activated, the brightness and contrast of
the monitor can be adjusted without entering the OSM menu by
using the front buttons.
The "Left" or "Right" buttons adjust the brightness level.
The "Down" or Up" buttons adjust the contrast level.
Selecting the factory preset allows the user to reset most of the
OSM control settings back to the factory settings.
Individual settings can be reset by highlighting the control need-
ing to be reset, and pressing the RESET button.
OSM control menus are available in eight languages. Press
"Left" or "Right" to select.
You can choose where you would like the OSM control image
to appear on your screen. Selecting OSM Position allows you
to manually adjust the location of the OSM control menu left, or
right.
You can choose where you would like the OSM control image
to appear on your screen. Selecting OSM Position allows you
to manually adjust the location of the OSM control menu up, or
down.
The OSM control menu will stay on as long as it is in use.
You can select how long the monitor waits after the last touch of
a button to shut off the OSM control menu. The preset choices
are 10-120 seconds by 5 seconds increments. Press "Left" or
"Right" to select.
This control completely locks out access to all OSM control
functions. When attempting to activate OSM controls while in
the Lock Out mode, a screen will appear indicating the OSM
controls are locked out.
There are four ways to use OSM LOCK OUT function:
1: OSM LOCK OUT with BRIGHTNESS and CONTRAST
control: This mode locks all OSM functions except for
BRIGHTNESS and CONTRAST.
To activate, press the SELECT and "Up" buttons
simultaneously, while in the OSM menu.
To deactivate, press the SELECT and "Up" buttons
simultaneously, while in the OSM menu.
19
– continued