MultiSync LCD1990FXP Manuel D'utilisation page 17

Controls
Information
Provides information about the current resolution being displayed by the monitor.
Also provides technical information including which preset timing is being used
as well as the horizontal and vertical frequencies.
OSM WARNINGS: OSM Warning menus alert the user when there are
problems with the input signal. These warnings will disappear when the Exit
button is pressed.
NO SIGNAL: This warning appears when there is no Horizontal or Vertical
Sync. After power is turned on or when there is a change of input signal, the
No Signal window will appear.
RESOLUTION NOTIFIER: This warning appears when the monitor detects a
resolution other than the optimized resolution. For the example, if the optimized
resolution for the monitor is 1280 x 1024 and a signal using a resolution of
1024 x 768 is detected, the "Resolution Notifier" warning will appear.
OUT OF RANGE: This warns if the input signal is out of the optimized resolution
and refresh rate range that is used by monitor.
Note: It is possible to change the DVI selection or to change the IPM settings
while the "NO SIGNAL" or "OUT OF RANGE" messages are displayed.
For advanced user menu items see "Advanced OSM Controls".
– continued
15