Customer Service And Spare Parts; Technical Specifications; Installation - AEG SK 98800-6I Mode D'emploi

Table des Matières

Les langues disponibles

Customer service and spare parts

If you cannot find the remedy for a malfunction in these operating instructions,

please contact your dealer or our customer service department and consult the

Guarantee card.

Selective ordering of replacement parts can save unnecessary travel and costs.

For this reason always provide the following appliance information:

Model Name

Model Number (PNC)

Serial Number (S-No.)

This information can be found on the rating plate inside the cabenit on the

left hand wall. We recommend that you enter this information here, so that

it is handy if needed.

The technical data is indicated in the rating plate on the left side inside the

appliance.

Take utmost care when handling your appliance so as not to cause any

damages to the cooling unit with consequent possible fluid leakages.

During normal operation, the condenser and compressor at the back of the

appliance heat up considerably. Always ensure that there is adequate

ventilation as a failure to do this will result in component failure and possible

food loss. See installation instructions.

Important: if the supply cord is damaged, it must be replaced by a special

cord or assembly available from the manufacturer or its service agent.

Table des Matières

Table des Matières