Tecma Namo Premium PLUS Manuel D'installation Et D'utilisation page 19

CAUTION!
This single flush over-ride function can cause over filling of a waste tank. For Emergency Use Only.
Disabling/Re-enablling Lockout Protection
■ Flush Lockout normally occurs when the holding tank becomes almost full. When this occurs, pushing the flush button causes tank symbol to flash, but does not
cause a flush.
Enabling Lockout
Press both buttons twice
(0.5<, <1.0 sec. 2 times)
{
Lockout ENABLED.
Unlock symbol light turns OFF
CAUTION!
Disabling the Toilet Lockout Function can cause overflowing of the waste tank.
Emergency Use Only.
www.thetfordmarine.com
Single Flush Override of
Flush Lockout
{
Toilet will not flush automaticalli when tank level
indicator is red.
Press and Hold
(>8.0 sec.)
{
Initiates one flush.
{
Flush Lockout reactivates.
19
Disabling Lockout
{
Lockout DISABLED.
Unlock symbol light turns ON
Note:
This red symbol will remain on
as long as lockout is disabled, even if the
holding tank is emptied.
Tecma Nano Owner's & Installation Manual
Press both buttons twice
(0.5<, <1.0 sec. 2 times)