Tecma Namo Premium PLUS Manuel D'installation Et D'utilisation page 17

Enter Water Refill Programming Mode
MARINE MODE
Sets empty bowl mode after flush
Within 3 additional seconds.
{
Toilet will now refill only trap at the
bottom of bowl
■ To switch modes of operation, go to the top of this diagram to enter water refill programming mode.
www.thetfordmarine.com
Remove both fingers.
LEDs stop flashing
Recommended water level depth
Approx. -5", 12.7 cm from the top of the rim
Press and hold both but-
tons for 3 seconds.
LEDs will flash, program-
ming mode will be entered
17
RESIDENTIAL MODE
Sets water level in bowl after flush.
Continue to Press and hold
both buttons, toilet will begin
to add water.
Release both buttons after 4
or 5 seconds (recommended
to minimize water use)
LEDs stop flashing
{
This sets the amount of water that will be
used in future flushes.
Tecma Nano Owner's & Installation Manual