Model Identification - Tecma Namo Premium PLUS Manuel D'installation Et D'utilisation

Model Identification

The premium plus has the ADD WATER and FLUSH buttons and the tank sensor indicator located below the FLUSH button.
The toilet's wall switch control has two primary functions:
■ An ADD WATER button – Adds approximately 0.5L of water each time it is pushed momentarily. Electronics prevent overfill.
■ A FLUSH button – Starts an add water and macerate sequence that runs the motor and adds water twice for maximum cleansing and minimum water usage. Se-
quence ends with a small amount of water added to the bowl to provide an odor trap. Recommended to minimize water use and for liquid waste disposal without
adding water.
ADD WATER
recommended before flushing solid waste
Press and
release
(Approx. 1 sec.)
{
Adds approx. 0.5 L of water
Can be repeted but only until max amount is reached
www.thetfordmarine.com
Operation
Premium Plus Model
15
T000029A
recommended for flushing liquid waste (minimize
Press and
release
(Approx. 1 sec.)
{
Starts FLUSH sequence
• Adds approx .25L of water
• Macerates
• Adds .75L of water
• Refills bowl
{
The amount of water refilled into the
bowl can be adjusted per the Water
Refill Programming Mode
Tecma Nano Owner's & Installation Manual
FLUSH
water usage)