Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Note:
Refer to Fig, C, D and E for all part references.
1
1
Place 1 in permanent position; trace outline.
4
L
L
Feed
through wall; connect to
7
H
3-1/2" 1(x)
Locate H position; cut hole.
Tecma Nano Owner's & Installation Manual
Installation
2
Mark / Cut hole 2- 5/8" x 3-3/4" and drill holes for
mounting screws.
5
T000011A
+
F
T000013A
T000014A
F
Materials Not Provided
■
In-line Strainer (if applicable)
■
3/4" - diameter water supply line (Raw Water installation)
■
3/4"- diameter minimum Vented Loop – if required (Raw Water installation)
■
1/2" - diameter water supply line (Fresh Water installation)
■
1-1/2"- diameter minimum Vented Loop – if required
■
1-1/2"- diameter Marine Discharge Hose
■
1-1/2"- straight or 90
■
Silicone caulk (white or clear)
■
Various Electrical Connectors
2- 5/8"
3-3/4"
M
12' - plan accordingly!
F
-
Black wire
Red wire
J
NP
NP
coupling (as needed)
O
10
3
DO NOT attach to wall!
M
L
L
M
Slide
through
.
6
Attach Water Supply
■ Fresh Water Installations -
refer to the Solenoid Harness and Acces-
sory
Kit instructions
■ Raw Water Installations -
refer to the Pump Harness and Accessory
Kit instructions
www.thetfordmarine.com
T
Publicité
Table des Matières
