Troubleshooting; Warranty - IKA RW 47 D Mode D'emploi

In cases of fault or overload operation the device
can become very hot (motor surface, cooling
fi ns, bearings).
If the device is operated too long in overload or if
the ambient temperature is too high, the device
switches off permanently.
In case of fault, proceed as follows:
• Switch the device off (power supply OFF) and
allow the device to cool down.
• Remove the stirrer tool and remove the device
from the assembly.
• Reduce the speed and switch on the device
without the stirrer tool (power supply ON).
In accordance with IKA
®
the warranty period is 24 months. For claims un-
der the warranty please contact your local dea-
ler. You may also send the machine direct to our
works, enclosing the delivery invoice and giving
reasons for the claim. You will be liable for freight
costs.

Troubleshooting

If the actions described fail to resolve the fault
- Contact the service department,
- Send the device for repair, including a short de-

Warranty

warranty conditions, The warranty does not cover wearing parts, nor
does it apply to faults resulting from improper
use or insuffi cient care and maintenance contra-
ry to the instructions in this operating manual.
sciption of the fault.
18