Manual tuning
If the signal from the station you want to select is weak,
you must tune into it manually.
1
Press INPUT, then rotate VOLUME/SELECT
within 5 seconds to select TUNER.
INPUT
Note
If no operation is performed within 5 seconds of pressing INPUT
on the front panel, the function of VOLUME/SELECT switches
back to volume.
2
Press INPUT repeatedly on the front panel to
select the reception band you want to tune.
"FM" or "AM" and the current frequency appear on
the front panel display.
INPUT
VOLUME/SELECT
VCR
VIDEO 1 VIDEO 2 DTV/CBL
DVD/CD
TUNER
TUNED
VOLUME
AUTO
VCR
VIDEO 1 VIDEO 2 DTV/CBL
DVD/CD
TUNER
VOLUME
AUTO
3
Hold down TUNER (AUTO/MAN'L) for a few
seconds until the "AUTO" indicator
disappears from the front panel display.
If "AUTO" is not shown on the front panel display,
you do not need to perform this step. In this case, skip
to step 4.
TUNER
AUTO/MAN'L
4
Press TUNER (AUTO/MAN'L), then rotate
VOLUME/SELECT within 5 seconds to tune
into the desired station manually.
Rotate rightward to tune to a higher frequency, or
rotate leftward to tune to a lower frequency.
TUNER
AUTO/MAN'L
Notes
• Manually tuning to FM stations will automatically change the
reception mode to monaural to increase the signal sensitivity.
• When tuned into a station, the "TUNED" indicator lights up and
the frequency of the received station is shown on the front panel
display.
TUNING
VCR
VIDEO 1 VIDEO 2 DTV/CBL
DVD/CD
TUNER
VOLUME
Disappears
VOLUME/SELECT
23