Operation - geo-FENNEL Selection PRO FL 40-PowerCross Plus SP Mode D'emploi

EN
E

OPERATION

Fix the instrument on the multi-functional mount by using the 1/4" adapter.
To move the instrument up or down on the mount declamp the knob (7).
For locking the desired position of the instrument tighten the knob again.
Use of the laser on a tripod.
Use of the laser with the magnets.
Use of the laser with strap attachment.
Set the ON/OFF knob to position „ON" . The instru-
ment is now ready for use (ON/OFF LED is illumi-
nated). An audible and optical (blinking lines) alarm
indicates if the instrument was set up outside of
the compensator range. Set up the instrument on
a more even surface.
To power off the instrument bring the ON/OFF knob in
position „OFF" . The instrument is now powered off and
the compensator is blocked to avoid damages during transport.
NOTE: During transport the ON/OFF knob (compensator clamp) must be set to
„OFF" . Disregard may lead to damages of the compensator.
FOLLOWING LASER LINES CAN BE PROJECTED
14
H
Unlock the instrument Unlock the instrument
V
Lock the instrument Lock the instrument
H V