Turning The System Off; Disabling The Stability Assist Function (Avc); Ausschalten Des Systems - Horizon Hobby Losi Mini WRC Manuel D'utilisation

TurninG The SYSTem off // auSSchalTen DeS SYSTemS //
miSe horS TenSion Du SYSTème // SpeGnere il SiSTema
Turn off the receiver first, then
turn off the transmitter.
Schalten Sie erst den Empfänger,
dann den Sender aus.
Mettrez hors tension le récepteur
en premier, puis l'émetteur.
Spegnere prima il ricevitore
e poi il trasmettitore.
CAUTION: Never power off the transmitter before the vehicle. You will lose control of your vehicle.
ACHTUNG: Schalten Sie niemals den Sender vor dem Fahrzeug aus. Sie verlieren die Kontrolle über das Fahrzeug.
ATTENTION: Ne mettez jamais l'émetteur hors tension avant le récepteur. Vous risqueriez de perdre le contrôle de votre véhicule.
ATTENZIONE: Mai spegnere il trasmettitore prima del veicolo, si avrebbe una perdita di controllo.
DiSaBlinG The STaBliliTY aSSiST funcTion (aVc)
28 28
If you participate in organized racing, you may be required
to turn Stability Assist off. To turn Stability Assist off:
1. Insert a Bind Plug in the BIND port on the receiver.
2. Insert a second Bing Plug in the DISABLE port on
the receiver.
3. Connect a fully charged battery pack to the ESC.
4. Power on the ESC. The orange LED flashes, indicating
the receiver is in bind mode.
5. Center the ST TRIM and TH TRIM dials on the transmitter.
6. Press and hold the BIND button while powering on the
transmitter.
7. Release the BIND button when the orange LED slowly
flashes. The transmitter and receiver are linked when
the orange LED is solid.
1
2
OFF
OFF
8. Pull the transmitter trigger to Full Throttle.
9. Push the transmitter trigger to Full Brake, then return
the trigger to center.
10. Turn the transmitter steering wheel to Full Right.
11. Turn the transmitter steering wheel to Full Left, then
return the steering wheel to center. The orange LED
flashes once.
12. Remove the Bind Plugs, then power off the receiver
to save the settings.
13. Power off the transmitter.
IMPORTANT: You must calibrate the receiver each time
it is placed in bind mode.
To activate AVC technology, see the steps in "Calibrating
the Receiver".
MINI WRC RTR: 1/5 4WD RALLY CAR MINI WRC RTR: 1/5 4WD RALLY CAR