Enarco ROCKET 2V 38 Manuel D'instructions page 20

b) Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask,
c) Avoid accidental starting. Ensure the switch is in the off position before plugging in.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
e) Do not overreach. Keep proper footing and balance at all times. This enables better control
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
g) If devices are provided for the connection of dust extraction and collection facilities,
4) Use of Power Tool
en
a) Do not force the power tool. Use the correct power tool for your application. The correct
b) Do not use the power tool if the switch does not turn it on and off. Any power tool
c) Disconnect the plug from the power source before making any adjustments, changing
d) Store power tools out of the reach of children and do not allow people unfamiliar with the
e) Look after your power tools. Check for misalignment or binding of moving parts, breakage
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
g) Use the power tool, accessories and tool bits etc., in accordance with these instructions
FRECUENCY CONVERTER AND POKERS
ROCKET
6
2V 38, 2V 50, 2V 60, 1V 38, 1V 50
non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
Carrying power tools with your finger on the switch or plugging in power tools that have the switch
on invites accidents.
left attached to a rotating part of the power tool may result in personal injury.
of the power tool in unexpected situations.
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
ensure these are connected and properly used. Use of these devices can reduce dust related
hazards.
power tool will do the job better and safer at the rate for which it was designed.
that cannot be controlled with the switch is dangerous and must be repaired
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
power tool or these instructions to operate the power tool. Power tools are dangerous in the
hands of untrained users.
of parts and any other condition that may affect the power tools operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
are less likely to bind and are easier to control;
and in the manner intended for the particular type of power tool, taking into account the