Monitor Settings; Osd Menu - SOMFY VSYSTEMPRO Manuel D'utilisation

EN
Bottom view
37 38 39 40
12
Buzzer level selector
Conversation
13
thumb-wheel
38
Brightness, contrast and screen
colour adjustment button.

6.1 OSD menu

[1]. Monitor on standby, press
Note: a different pictogram appears at the top right of the screen depending on whether an SD
micro-card has been inserted
it will not be possible to transfer the recordings present in the internal memory of the monitor.
[2]. Press:
-
to access the menu (go to stage [3].).
-
to visualise the recordings made previously (see "9.2 Operations possible on saved recordings", page 11).
-
to activate or deactivate the automatic recording option (see "9.1 Automatic or manual photographing", page
11).
[3]. Press or
(see "6.2 Modifiable parameters", page 9).
[4]. Press to activate the modification of the parameter selected.
[5]. Press or to modify the value of the parameter.
[6]. Press to validate the modification or
[7]. Press to exit the menu or
[8]. If you have chosen the "EXIT" parameter, press
Note: the monitor switches to standby a er about 10 seconds if no menu buttons are pressed.
8

6 MONITOR SETTINGS

Front panel
Perform a buzzer test, adjust the 3-position selector to the position that
suits you.
volume setting Perform a communication test with the external module. Turn the
thumb-wheel until the voice of the person speaking can be heard clearly.
Monitor on standby, press
menu (see below).
This menu allows the user to set the date, time, brightness, colour and
contrast.
Caution: this screen switches off a er about 10 seconds if no buttons
are pressed.
to activate the screen and access the OSD menu.
or not in the monitor. If there is no SD micro-card,
SD
to choose the parameter to be adjusted
to cancel the modification.
or to select the "Exit" parameter.
12
13
36
to activate the screen and access the OSD
to exit the OSD menu.
Copyright © 2016 Somfy SAS. All rights reserved.
Back of the front panel
35
Memory
Photo Auto
Menu
MENU
DISPLAY
MEMORY
TIME
EXIT