2.1 General description
The video monitor must be combined with at least one external module to visualise and talk to a visitor.
Depending on your installation, it also allows communication between two monitors.
This monitor is equipped with buttons which can be used to:
- answer or reject a visitor's call
- talk between several monitors in the same dwelling
- activate a motorised gate, an electric lock or other peripherals
- activate io-homecontrol® Somfy products
- take a photo of visitors manually or automatically for every call made from the external module.
2.2 Presentation of the monitor
Bottom view
37 38 39 40
Mark
Designation
1
LCD screen - 800 x 480 pixels
2
Communication buttons
3
Speaker
4
Microphone
5
io control
6
Removable terminal block 1
7
Removable terminal block 2
8
BUS line selector
9
Address switch (8 selectors)
10
Intercommunication switch (4 selectors)
12
Buzzer level selector
13
Conversation volume setting thumb-wheel
14
io control battery
2.3 Operation of the buttons
Operation of the io-homecontrol® control (no. 5)
Open button: press briefly to open the relative product (roller shutter, awning, garage door, etc.) or to switch
the light on.
Stop button: press briefly to stop the relative product.
Close button: press briefly to close the relative product or switch the light off.
Selecting the channel: press the number of times required to activate the desired channel.
Note: channel 5 corresponds to 4 LEDs lit.
Copyright © 2016 Somfy SAS. All rights reserved.
2 PRESENTATION OF THE MONITOR
Front panel
18
5
1
12
13
2
36
3
Mark
Designation
15
io programming button (PROG)
18
"Battery low" indicator light
35
Support for SD micro card
Status indicator light:
automatic photo (light on)
36
-
new photo in the memory (flashing light)
-
"Navigation between images" button
37
Adjusting the screen
38
Setting the date + time
Triggering photos manually
39
Automatic photo button (ON/OFF)
40
4
Back of the front panel
35
6
7
8
9
3
EN
15
10
14
3