Abus TVCC91500 Manuel Utilisateur page 37

LCD/CRT
COMMUNICATION
CAMERA ID
RETURN
LANGUAGE
Function
LANGUAGE
RETURN
VERSION
Function
VERSION
RETURN
MAINTENANCE
Function
CAMERA RESET
RETURN
Adjusts gamma value to the video display unit
LCD: Preset for LCD monitors
CRT: Preset for CRT monitors
Settings for the RS485 interface of the camera
PROTOCOL (PELCO-D): Protocol information (Pelco-D only)
ADDRESS (1-255): Bus address (bus ID)
BAUDRATE (2400-115200): Baud rate setting
DATABIT (8 BIT): Data bit setting (8 bit only)
PARITY (OFF, ODD, EVEN): Parity setting
STOPBIT (1 BIT): Stop bit setting (1 bit only)
OFF: Camera name not shown in video image
ON: Camera name shown in video image
Available characters: Letters, numerals, signs, symbols
(CHR1, CHR2)
Up, Down, Right, Left: Change selection and skip to 2nd line
CLR: Delete highlighted character
POS: Change position
Back to the previous menu page
Description
(ENGLISH): The language of the screen menu is fixes as English.
Back to the previous menu page
Description
(1.0): Currently installed firmware version of the camera
Back to the previous menu page
Description
Select this function to reset the camera to the factory settings.
Back to the previous menu page
37
English