Operating; Fm Radio Operation - LENCO PA-360BK Mode D'emploi

Bluetooth pair and connect
● Turn off any Bluetooth devices previously paired (linked) with this unit.
● Turn on the Bluetooth feature on your phone or music player.
● Turn on and set this unit to Bluetooth mode. The flashing: "bt" on LED display indicates it is
in pairing mode.
● Set your phone or music player to search for Bluetooth devices.
● Select "Lenco PA-360" from search results on your phone or music player.
● Select OK or YES to pair this unit with your phone or music player.
● If protected, enter 0000 for passkey steady blue light indicates successful connection.
● Hold pair key to disconnect current convection and eater pairing mode.
"This product has a Bluetooth reception function, you can not transmit any Bluetooth
sound with it: this means that you can receive wirelessly a Bluetooth sound signal from an
external source like a smartphone."
TWS (True Wireless Stereo) mode
1. Turn on 2 PA-360 and select both unit INPUT mode as Bluetooth
2. Press "TWS" key on speaker set for 2 seconds, it will show "
connecting to another speaker equipment and will connect successfully after a sound
indication or display shows "bt"
3. Turn on your Bluetooth feature on your mobile phone to search Bluetooth devices and
select "Lenco PA-360" from the search result, select OK or YES to pair this unit with your
mobile phones and a steady blue light will indicate the connection is successful and can
play any music from your mobile phones.
4. Press "TWS" key on speaker unit for 2 seconds and it will turn off TWS features after
shows " " on display.
(The "LEFT" channel will be the speaker A, the other speaker will be the "RIGHT" channel.)

FM Radio Operation

1. Before using the radio functions, you must attach the supplied antenna. Adjust the
antenna to obtain optimum reception.
Press [SOURCE] repeatedly to select FM mode.
2. Press the CH+/CH- key on the remote control or Hold the key "
skip to the preset station.
3. Press the TU+/TU- key on the remote control or press the key "
adjust the radio frequency manually.
The number key on the remote control can directly select the frequency. Such as enter
"8,8,1" keys for 88.1MHz, "1,0,4,0" keys for 104.0MHz.
4. Press the PLAY key on the remote control or Press the key " " on the top panel, the
machine will scan radio channels from low-frequency to high-frequency by itself and
memorize the channels one by one.
24

OPERATING

" on display, TWS is
/ " on the top panel to
/ " on the top panel to