Operating - LENCO PA-200BK Mode D'emploi

Bluetooth pair and connect
●
Turn off any Bluetooth devices previously paired (linked) with this unit.
●
Turn on the Bluetooth features on your phone or music player.
●
Turn on and set this unit to Bluetooth mode. The flashing: " " on LED display indicates it is in
pairing mode.
●
Set your phone or music player to search for Bluetooth devices.
●
Select "Lenco PA-200" from search results on your phone or music player.
●
Select OK or YES to pair this unit with your phone or music player.
●
If protected, enter 0000 for passkey steady blue light indicates successful connection.
TWS (True Wireless Stereo) mode
1. Turn on 2 PA-200 and select both unit INPUT mode as Bluetooth
2. Press "TWS" key on speaker set for 2 seconds, it will show "
to another speaker equipment and will connect successfully after a sound indication or display
shows " "
3. Turn on your Bluetooth feature on your mobile phone to search Bluetooth devices and select
"Lenco PA-200" from the search result, select OK or YES to pair this unit with your mobile
phones and a steady blue light will indicate the connection is successful and can play any music
from your mobile phones
4. Press "TWS" key on speaker unit for 2 seconds and it will turn off TWS features after shows "
" on display.
FM Radio Operation
1. Before using the radio functions, you must attach the supplied antenna. Adjust the antenna to
obtain optimum reception.
Press [SOURCE] repeatedly to select FM mode.
2. Press the CH+/CH- key on the remote control or Hold down the key "
skip to the preset station.
3. Press the TU+/TU- key on the remote control or press the key "
radio frequency manually.
The number key on the remote control can directly select the frequency
4. Press the key " " on the top panel or remote, the machine will scan radio channels from low-
frequency to high-frequency by itself and memorize the channels one by one.
BATTERY
In AC (power) mode the battery will automatically charge. A slow red flashing light indicates that the
battery is charging. When fully charged a green light will be displayed.
In DC (battery) mode a green light indicates that the battery level is full. If the battery level is low a red
light will be displayed. This indicates that the battery must immediately be charged or the speaker will
turn off.
" on display, TWS is connecting
9

OPERATING

" on the top panel to
" on the top panel to adjust the