Setting Up The Appliance; Operation; Setting The Units Of Weight And Weighing - SilverCrest Z31183 Instructions D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 58
As soon as the batteries have been inserted, the hour display
begins to flash. To set the hour press the ▲ Z / T button
or the ▼ UNIT button
Press the T-SET button
Press the ▲ Z / T button or ▼ UNIT button to set the minutes.
Press the T-SET button. The clock is now set.
Note: If you need to reset the time, press and hold the
T-SET button until the time display flashes. Proceed as
described above.

Setting up the appliance

Place the appliance on a flat, non-slip surface.
Note: Because furniture surfaces are made of a variety
of materials and treated with very different products, it
cannot be ruled out that some of these materials may
contain chemicals that will attack and soften the rubber
feet. If necessary, place an anti-slip mat under the feet of
the appliance.
Note: Remove the protective film from the balance tray

Operation

Setting the units of weight and
weighing
You can choose between metric and imperial / avoirdupois units
of weight. For the range 0 g–999 g, the unit of weight is in g;
from 0 oz–15.9 oz, the unit of weight is shown in oz. For the
range from 1000 g upwards, the unit of weight is in kg; from
16 oz the unit of weight is shown in lb:oz. Likewise, you can
weigh liquids, in which case press the ▼ UNIT button
.
6
, to go to the minute display.
4
7
.
2
.
6
GB/IE
11

Publicité

Table des Matières
loading

Table des Matières