Inserting/Replacing The Batteries In The Scale; Setting Up The Device - SilverCrest SKIU 5 A1 Mode D'emploi

Inserting/replacing the batteries in the scale

NOTE
Insert only new batteries (type AAA/micro/LR03) into the "Scale" battery
compartment
1) Turn the scale over and place it on a soft surface so as to not to scratch the
surface.
2) Open the "Scale" battery compartment
3) If present, remove the old batteries.
4) Insert the new batteries. Pay attention to the polarity indicated in the
"Clock" battery compartment
5) Close the "Scale" battery compartment
NOTE
► When the batteries in the scale are running low, a battery symbol will
appear on the display
will be deactivated.
This shows that the batteries need to be changed.

Setting up the device

Place the kitchen scales on a level and slip-free surface.
CAUTION – PROPERTY DAMAGE
► This appliance is equipped with non-slip rubber feet.
As furniture surfaces may be made of a variety of materials and are treated
with many different types of cleaning agents, it cannot be completely ruled
out that some substances contain ingredients which may perish the rubber
feet and soften them. If possible place an anti-slip mat under the feet of the
appliance.
NOTE
► You can also hang the scales as a clock on the wall. To do this, use the
hanger
SKIU 5 A1
.
. The background lighting on the display
on the rear of the scale.
.
.
.
GB │ IE
│ 19 ■