Practical Cooking Advice - SCHOLTES CI 96I I S Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

wish to place the food in the oven after it has been preheated,
GB
immediately following a high-temperature cooking programme,
the text "Hot" will appear on the display until the temperature of
the oven has fallen to 40°. At this point it will be possible to place
the bread in the oven.
Recipe for BREAD:
1 Dripping pan weighing 1000 g max placed on a low shelf level
Recipe for 1000 g of dough: 600 g flour, 360 g water, 11g salt,
25 g fresh yeast (or 2 sachets of powder yeast)
Method:
• Mix flour and salt in a large bowl.
• Dilute yeast in lukewarm water (approximately 35 degrees).
• Make a small well in the mound of flour.
• Pour in water and yeast mixture.
• Knead dough by stretching and folding it over itself with
the palm of your hand for 10 minutes until it has a uniform
consistency and is not too sticky.
• Form the dough into a ball shape, place it in a large bowl
and cover it with transparent plastic wrap to prevent the
surface of the dough from drying out. Select the manual LOW
TEMPERATURE function on the oven and set the temperature
to 40°C. Place the bowl inside and leave the dough to rise for
approximately 1 hour (the dough should double in volume).
• Cut the dough into equal sized loaves.
• Place them in the dripping pan on oven paper.
• Cover the loaves with flour.
• Make incisions on the loaves.
• Remember to pour 100 ml of cold water into the baking
tray in position 5. For cleaning purposes, we recommend
the use of water and vinegar.
• Place the loaves inside the oven while it is still cold.
• Start the
BREAD cooking mode.
• Once baked, leave the loaves on one of the grill racks until
they have cooled completely.
BAKED CAKES mode
This function is ideal for baking cakes. Place the food inside
the oven while it is still cold. The dish may also be placed in a
preheated oven. It will only be possible to adjust the duration by
-10/+10 minutes.
Programming cooking
! A cooking mode must be selected before programming can
take place.
Programming the cooking duration
1. Press the
button several times until the
three digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards "+" and "-" to adjust the
duration.
3. Press the
button again to confirm;
4. When the set time has elapsed, the text END appears on the
28
DISPLAY, the oven will stop cooking and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and
15 minutes is programmed. The programme will stop
automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking end time
can be scheduled.
1. Follow steps 1 to 3 to set the duration as detailed above.
2. Next, press the
digits on the DISPLAY begin to flash.
3. Turn the TIMER KNOB towards "+" and "-" to adjust the
hour value.
4. Press the
DISPLAY begin to flash.
5. Turn the TIMER KNOB towards "+" and "-" to adjust the
minute value.
6. Press the
7. When the set time has elapsed, the text END appears
on the DISPLAY, the oven will stop cooking and a buzzer
sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and 15
minutes is programmed, while the end time is set to 12:30.
The programme will start automatically at 11:15 a.m.
Programming has been set when the
are illuminated. The DISPLAY shows the cooking end time
and the cooking duration alternately.
To cancel programming, turn the SELECTOR knob to the "0"
position.

Practical cooking advice

! Do not place racks in position 1 and 5 during fan-assisted
cooking. This is because excessive direct heat can burn
temperature sensitive foods.
! In the SPIT ROAST and ROASTING cooking modes, place
the dripping pan in position 1 to collect cooking residues (fat
and/or grease).
MULTILEVEL
• Use positions 2 and 4, placing the food which requires
more heat on 2.
• Place the dripping pan on the bottom and the rack on top.
PIZZA
• Use a light aluminium pizza pan. Place it on the rack
provided.
For a crispy crust, do not use the dripping pan as it
icon and the
prevents the crust from forming by extending the total
cooking time.
• If the pizza has a lot of toppings, we recommend adding
the mozzarella cheese on top of the pizza halfway through
the cooking process.
button until the
icon and the two
button again until the other two digits on the
button again to confirm.
and
buttons

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ci 96i a sCi 96i w sCi 96i k sCi 66 v w sCi 66 v i sCi 66 v a s

Table des Matières