IKA lab dancer Mode D'emploi page 7

Correct use
The IKA ® lab dancer is designed for shaking test tubes.
Gently push the test tube into the soft attachment to
start shaking. Shaking stops as soon as you lift out the
test tube.
Unpacking
Please unpack the device carefully and check it for dama-
ge. It is important that any transport damage is detected
when the device is unpacked. If necessary, an inventory
of the damage should be made immediately (postal ser-
vice, railway, haulage company).
As supplied, the package contains:
The IKA ® lab dancer, a plug-in power supply unit and an
instruction manual.
Commissioning
Connect the appliance to a socket. (Please refer to the
information in the "Technical Data" section).
Maintenance and cleaning
The IKA lab dancer is maintenance-free. It is subjekt
®
only to the natural wear and tear of components and their
statistical failure rate. Use only cleansing agents which
have been approved by IKA to clean IKA devices.
To remove use:
Dyes isopropyl alcohol
Constructions materials water containing tenside / iso-
Cosmetics water containing tenside / iso-
Foodstuffs water containing tenside
Fuels water containing tenside
For materials which are not listed, please request informa-
tion from IKA. Wear the proper protective gloves during
cleaning of the devices. Electrical devices may not be pla-
ced in the cleansing agent for the purpose of cleaning.
Before using another then the recommended method for
cleaning or decontamination, the user must ascertain with
the manufacturer that this method does not destroy the
instrument.
propyl alcohol
propyl alcohol
7