Using The Pool Cleaner; Setup - Maytronics Dolphin W 20 Mode D'emploi

5. USING THE POOL CLEANER

The Pool Cleaner is very easy to use. Just follow the simple steps to get started, and your Pool Cleaner
is ready to go.

5.1 Setup

Before using the Pool Cleaner for the first time perform the following steps:
Unwind the cable and stretch it out
completely so that it has no kinks.
3m/10ft
Position the power supply so that it is
approximately in the middle of the long
side of the pool at a distance of 3m/10ft.
2
1
Attach the floating cable to the power supply
by inserting it with the notch on the connector (1)
lined up with the groove in the socket on the
power supply and turning clockwise (2).
4
Plug in the power supply and leave it in the
OFF position.
Robotic Pool Cleaner W 20 User Instructions
|