Using The Pool Cleaner; Setup - Maytronics Dolphin 2x2 Gyro Instructions D'opération

EN

5. USING THE POOL CLEANER

5.1. Set Up
Position the power
supply so that it is
approximately in the
middle of the long side
of the pool at a
distance of 3m/10ft.
Attach the floating
cable to the power
supply by inserting it
with the notch on the
connector (1) lined up
with the groove in the
socket on the power
supply and turning
clockwise (2).
Change diagonal handle position for
water line sideway movement.
To adjust the handle angle:
A. Press the latch down and hold it
in position.
B. Move the handle to the desired
position and release the latch to hold
the handle in place.
1 - 2 Normal advance
More efficient cleaning action on water-
line.
3 - 4 Fast advance
Fast speed – for faster but less efficient
cleaning action on water-line.
4
1
2
A
B
3
4
Dolphin 2x2 Gyro Pool Cleaner | Operating Instructions
40°C Max
104°F Max
GFI/ELI