Using The Pool Cleaner; Setup - Maytronics Dolphin Master M4 Mode D'emploi

5. USING THE POOL CLEANER

The Pool Cleaner is very simple to use. Simply put it into the pool and make sure that it is properly
sitting on the floor of the pool. Turn it ON and let it get the job done.

5.1. Setup

Before using the Pool Cleaner for the first time perform the following steps:
Some models arrive with plastic coverings on the brushes.
Remove them before use.
While pushing in the handle buttons turn the ring so that the large projection on the ring lines up with
the projection on the Pool Cleaner body.
4
-Book_8151255_MCC6-MTC6.indb 4
Unwind the cable and stretch it out
completely so that it has no kinks.
Robotic Pool Cleaner MCC6/MTC6 | User Instructions
15/2/2012 10:48 AM