Using The Pool Cleaner; Setup; Adjusting The Handle Angle - Maytronics Dolphin Explorer Classic 9 Manuel D'utilisation

5. USING THE POOL CLEANER

The Pool Cleaner is very simple to use. Simply put it into the pool and make sure that it is properly
sitting on the floor of the pool. Turn it ON and let it get the job done.

5.1. Setup

Before using the Pool Cleaner for the first time perform the following steps:
Some models arrive with plastic coverings
on the brushes.
Remove them before use.

5.1.1. Adjusting the handle angle

The robot's handle should be adjusted and locked diagonally in order to ensure optimum cleaning
results.
The handle angle can be adjusted also to determine the speed at which the robot advances along
the water-line.
4
8151620_Expolorer_all languages.indd 4
Unwind the cable and stretch it out
completely so that it has no kinks.
To adjust the handle angle:
A. Press the latch down and hold it
in position.
A
B. Move the handle to the desired
position and release the latch to hold the
handle in place.
B
Dolphin Explorer Classic 9 / Top 9 User Instructions
|
6/03/13 5:25 PM