Using The Pool Cleaner; Set Up - Maytronics Classic 2 Instructions D'opération

4. USING THE POOL CLEANER

4.1. Set Up

Before using the Pool Cleaner for the first time perform the following steps.
Unwind the cable and stretch it out
completely so that it has no kinks.
Position the power supply so that it is
approximately in the middle of the long
side of the pool at a distance of 3m/10ft.
Attach the floating cable to the
power supply by inserting it with the
notch on the connector (1) lined up
with the groove in the socket on the
power supply and turning clockwise (2).
4
Remove the plastic coverings before use.
GFI/ELI
Change diagonal handle position
for water line sideway movement.
To adjust the handle angle:
A. Press the latch down and hold
it in position.
B. Move the handle to the desired
position and release the latch
to hold the handle in place.
Robot Pool Cleaner Classic 2 / Top 2 | Operating Instructions
40°C Max
104°F Max
1,2: Normal advance
More efficient cleaning
action on water-line.
3,4: Fast advance
Fast speed – for faster
but less efficient cleaning
action on water-line.