Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• On the receiver unit, the
following screen is displayed.
The pairing is established.
When the pairing is established,
the LINK lamp lights in green.
To establish a pairing with 2 or
more devices
Set each device to be paired with
this flash unit as the receiver unit
and repeat steps 3 and 4.
When you are finished with pairing
with all receiver units, select [EXIT]
on the commander unit, and then
[OK] on the following screen.
GB
20
Publicité
Chapitres
Table des Matières
