Wireless flash photography (with radio wireless communications)
Radio wireless flash
photography
This flash unit supports radio
wireless communications for flash
photography.
Specify [CMD] for the commander
unit attached to the camera;
and [RCV] for the receiver unit
(off-camera flash) of which flash
operation is wirelessly triggered.
Hint
• To perform radio wireless
flash photography, you need
to establish paring between
the commander unit and the
receiver unit(s) in advance (page
18).
1
Press the WL button ( )
on this flash unit and select
[CMD] for the commander
unit; and [RCV] for the
receiver unit.
• To specify the flash unit as the
• To specify the flash unit as the
The radio wireless communication
distance available between
the commander unit and the
receiver unit is approximately 30
m (98.4 ft.). (Acquired under our
measurement conditions.)
commander unit, select [CMD].
receiver unit, select [RCV].
GB
GB
23