USE
Controls
Switching the fan on and off
• Use the On/Off button (T1) to switch on the fan and select the
extractor setting desired with the 'T2', 'T3' or 'T4' buttons.
The LED indication on the buttons shows which setting has been
selected.
• Use the 'T4' button to switch on the intensive setting.
• The intensive setting switches off automatically after 10 minutes.
After these 10 minutes the speed is reduced to the
setting previously selected.
Switch the lighting on and off
• Use the 'L' button to switch the lighting on and off.
Grease filter indication
• The 'S1' indicator light switches on when the grease filter needs to
be cleaned.
• The indicator light switches on after the extractor hood has been in
use for 100 hours. This is to indicate that the grease filter needs to
be cleaned.
• Press and hold the 'T3" button for 3 seconds to reset the indication.
The 'S1' indicator light flashes 3 times to confirm that the
setting has been reset.
EN 5