Pelgrim ISW950RVS Mode D'emploi page 36

USE
EN 6
Carbon filter indicator
• Press and hold the 'T2' button for 3 seconds
• to activate the carbon filter contamination indication.
The LED indication on the 'T2' button flashes 2 times in
confirmation.
• After the extractor hood has been in use for 200 hours with the
carbon filter contamination indication activated, the 'S1' indicator
light starts to flash. This indicates that the carbon filter needs to be
replaced.
• Press and hold the 'T2' button again for 3 seconds to switch off the
alarm.
The LED indication on the 'T2' button flashes 1 time in confirmation.