Dimensions; Important - S&P CADS-HE Instructions De Montage Et D'utilisation

DIMENSIONS

Version without by-pass
CHARACTERISTICS
Heat exchanger efficiency (%)
100
90
80
70
100
INSTALLATION
CAD HR S is designed for mounting on the ceiling. The product is provided with fixing points located at the corners of the
box. To avoid the condensates returning to the appliance it is necessary to fit a siphon to the condensate evacuation
tube.
After placing the equipment in the proper position,
making the connection to the ducts. Connect the drain trap to the cover.
It must be connected to the sewage system (pipe 15/21 (1/2')) by means of a siphon.
Fill the siphon to avoid smells.
Be sure to check the correct installation of the product (100% horizontal without inclination to ensure a proper
Product is reversible: depending on the network configuration, the product can be reversed (see « Configuration ») as
C A D S H R 0 3
Q v ( m 3 / h )
200 300
condensate drainage.
Version with by-pass
787
661
577
Pressure drop (Pa)
200
150
100
50
0
100 150

IMPORTANT:

Important note:
well as the by-pass.
8
A D S H R 0 3
F i l t er G 4
Exchanger
F i l t er G 2
Q v ( m 3 / h )
200 250 300