Select the sub menu(Digital Output, DTS,
4
Dynamic Compression) using the ...† buttons,
then press the ENTER or √ button.
Select the item that matches the audio
connection you've selected on pages
21~23(Method 1, 2 and 3).
DVD-Recorder
No Disc
Timer Rec.
Digital Output
DTS
Setup
Dynamic Compression: On
MOVE
ENTER
Digital Output
•
PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM if your amplifier system is stereo and/or
Dolby Prologic.
•
Bitstream : Outputs bitstream (original format) such as
Dolby or DTS.
Select bitstream if your amplifier system has multi
channel digital audio surround decoding (Dolby Digital
and/or DTS).
DVD-Recorder
No Disc
Timer Rec.
Digital Output
DTS
Setup
Dynamic Compression: On
MOVE
ENTER
DTS
•
On : Outputs DTS bitstream. (via Digital Audio
Output)
Select DTS when connecting to a digital amp with
DTS decoder.
•
Off : Doesn't output DTS bitstream (original format).
•
When DTS soundtrack is played, sound is not output
from Analog Audio Output.
DVD-Recorder
No Disc
Timer Rec.
Digital Output
DTS
Setup
Dynamic Compression: On
MOVE
ENTER
Audio
: PCM
√ √
: Off
√ √
√ √
RETURN
EXIT
Audio
: PCM
PCM
√ √
: Off
Bitstream
√ √
√ √
RETURN
EXIT
Audio
: PCM
√ √
: Off
Off
√ √
On
√ √
RETURN
EXIT
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
•
On : When movie soundtracks are played at low volume
or from small speakers, the system can apply
appropriate compression to make low-level content more
intelligible and prevent dramatic passages from getting
too loud.
•
Off : You can enjoy the movie with standard Dynamic
Range.
DVD-Recorder
No Disc
Timer Rec.
Digital Output
DTS
Setup
Dynamic Compression On
MOVE
ENTER
5
Select the desired item(PCM, Bitstream, DTS-
Off, DTS-On, Dynamic Compression-Off or
Dynamic Compression-On) using the ...†
buttons
Then press the ENTER or √ button.
Press the RETURN or œ button to return to
s
the previous menu.
NOTE
Press the MENU button to exit the menu.
Audio
: PCM
√ √
: Off
√ √
Off
√ √
On
RETURN
EXIT
English - 33