Operation - Technibel Climatisation CAFM75R5IA Mode D'emploi

Operation

STEP 2
STEP 3
• To warm up the system, the power mains must be turned on at least five
NOTE
(5) hours before operation.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 1, 6
STEP 4
STEP 5
To start the air conditioner
Press the operation button (ON/OFF button).
Setting the mode
Press the MODE button to select the mode of your choice.
[ (AUTO), (HEAT),
Setting the fan speed
Press the FAN SPEED selector button to select the fan
speed of your choice.
[ (AUTO), (HI.),
If AUTO is selected, the fan speed switches automatically.
Setting the temperature
Use the or button as appropriate to change the
temperature setting as desired.
( reduces the temperature, and
temperature.)
* The temperature cannot be set during FAN mode operation.
Setting the airflow direction
When more than one indoor unit is connected, the UNIT
button is used first to select a unit. Then use the FLAP button
to set the airflow direction to a specific angle or to sweep.
To stop the air conditioner
Press the operation button (ON/OFF button) again.
(DRY), (COOL) or (FAN)]
(MED.) or (LO.)]
increases the
9