Wireless Remote Control Unit (Optional Parts); Parts Name And Functions - Technibel Climatisation CAFM75R5IA Mode D'emploi

C: MODE button
E: FAN SPEED selector button
J: TIMER SET button
K: Time setting buttons
A: ON/OFF operation button
B: Transmitter
C: MODE button
D: Temperature setting
buttons
E: FAN SPEED selector button
Wireless Remote Control Unit
(Optional parts)

Parts Name and Functions

L: SET button
M: CL button
P: ACL button
(ALL CLEAR)
The illustration above pictures the wireless remote control unit after the cover
NOTE
has been lowered and removed.
This button is for turning the air conditioner on and off.
When you press the buttons on the wireless remote control unit, the
appears in the display to transmit the setting changes to the receiver in the
air conditioner.
Use this button to select one of the following five operating modes.
(AUTO) : Used to automatically set cooling or heating operation. Only for single
heat pump type
(HEAT) : Used for normal heating operation. Only for heat pump type
(DRY) : Used for dehumidifying without changing the room temperature.
(COOL) : Used for normal cooling operation.
(FAN) : Used to run the fan only, without heating or cooling operation.
: Press this button to increase the temperature setting.
: Press this button to decrease the temperature setting.
(AUTO) : The air conditioner automatically decides the fan speeds.
(HI.) : High fan speed
(MED.) : Medium fan speed
(LO.) : Low fan speed
B: Transmitter
O: Remote control sensor
A: ON/OFF operation button
D: Temperature setting buttons
I: FLAP button
G: ADDRESS button
F: FILTER button
N: VENTILATION button
H: A/C SENSOR button
Q: Slide switch
(temperature range: 17 to 27° C)
(temperature range: 16 to 26° C)
(temperature range: 18 to 30° C)
(temperature range: 18 to 30° C)
mark
5