Name Of Parts And Operation Selector Switch; Indoor Unit - Technibel Climatisation MAV 184 C Notice D'utilisation

NAME OF PARTS AND OPERATION SELECTOR

INDOOR UNIT

3
3
4
2
1
1. Remote control unit.
2. Sensor: Detects the room temperature around the remote
control unit, the air conditioner is controlled accordingly.
3. Air outlet: Conditioned air is blown out of the air conditioner
through the air outlet.
4. Air intake: Air from the room is drawn into this section and passes
through air filter which removes dust.
2
1
5
COOLING Model Only
9
COOL / DRY / HEAT Model Only
9
4
COOLING Model Only
5
OFF
TEST
OPR
OFF
TEST
OPR STANDBY
7
COOL / DRY / HEAT Model Only
7 5
7 5
8
5. Remote control receiver: This section picks up infrared
signals from the remote control unit (Transmitter).
6. Operation selector.
ON Position:
OFF Position:
3
ON
6
9
TIMER
7
ON
TIMER 9
8
In this position the air conditioner is operating
and controlled by the remote control unit.
Set the selector normally in this position.
Switch the selector to the off position if you
are not going to use the air conditioner for
a few days or longer.
EG
6
OFF
ON
TEST