Safety Features; Cleaning And Maintenance - EUROM SANI 400 WiFi Manuel D'utilisation

Masquer les pouces Voir aussi pour SANI 400 WiFi:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 38

Safety features

In case of internal overheating, the overheating safeguard will switch the heater
off. This may occur if the heater cannot give off enough heat or if it does not get
enough fresh air. As mentioned above, this is generally caused by (partially)
covering the heater, installing the heater too close to a wall or something similar.
When the heater has cooled down sufficiently, it will in principle start again
automatically, however if you do not remove the cause of the cut-off then this will
probably be repeated. Regular overheating can give rise to irreparable damage.
When the overheating safeguard switches the heater off, set the switch to 'O' (off),
unplug and allow the heater to cool down. Remove and/or amend the cause of
overheating and reuse the heater as normal. If you cannot find a cause and
overheating recurs, stop using the heater, and take it in for inspection/repair.

Cleaning and maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common
cause of overheating so these should be removed regularly. Switch off the heater,
remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do
not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or
chemical solutions!
The heater contains no other parts which need maintenance.
Removal
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment
contains valuable materials, suitable for recycling. These
materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by
unregulated waste collection. Therefore, please make sure that
you bring old equipment to a designated collection point.
Alternatively, contact the original supplier, who can make sure
that as many of the components as possible can be recycled.
36

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

350067350098

Table des Matières