Kompernass WK 8 B4 Mode D'emploi page 48

♦ Then switch to the next field using the
♦ Repeat the steps described above to set all ten characters.
Confirm your selection with the OK button.
♦
♦ Move the mode selector switch z to the "ON" position. Wait
until the camera enters standby mode after 15 seconds.
♦ Press the ON button y on the WiFi remote control l.
The operating LED k on the WiFi remote control flashes blue
twice and the camera screen q lights up briefly. The camera's
WiFi is activated and can be connected to a smartphone.
♦ Set the smartphone so that it scans for WiFi devices. You can find
a detailed description of how to do this in the operating instruc-
tions for your smartphone.
♦ From the list of devices found on your smartphone, select the
entry WK 8 B4_xxxxxx (xxxxxx = UID number) or your custom
WiFi name.
♦ Enter the WiFi password that you entered in the camera's menu.
The camera is now connected to your smartphone.
♦ Open the Wildcam app on your smartphone. The start screen
appears. Read and confirm the privacy policy. The main view
appears.
NOTICE
► The camera must be reconnected to your phone each time
the camera's WiFi is turned off. The app may need to be
closed and then reopened for a new WiFi connection.
► If you reset the camera to its factory default, the WiFi pass-
word will also be reset. You will be required to enter a new
WiFi password.
■ 44 │ GB │ IE
button.
WK 8 B4