Video Length; Audio Recording - Kompernass WK 8 B4 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 129
Time lapse video resolution
Select the time lapse video resolution: 5200 × 3900P,
4608 × 3456P, 4416 × 3312P, 4000 × 3000P, 3648 × 2736P,
3264 × 2448P, 3072 × 2304P, 2592 × 1944P (preset) or
2048 × 1536P. The higher the resolution, the more detailed the
recordings. At higher resolutions, the capacity of the memory card is
exhausted faster. This setting only applies to time lapse recordings.

Video length

Use the
/
buttons to select the length of the video recording
(between 3–59 seconds or 1–10 minutes) that will be made when
video recording is activated. The longer the recording time selected,
the shorter the operating time. The preset video length is 10 seconds.

Audio recording

If you want the camera to record sound when recording videos,
select "On" here.
Shot lag
Use the
/
buttons to select the minimum time period that the
camera should wait before reacting to subsequent activation of the
main sensor after the initial recording. During the selected interval,
the camera will not record any images or videos. This prevents the
memory card from being filled up with too many recordings of the
same event. You can select between 5–59 seconds or 1–60 minutes.
The default setting is a recording interval of 5 seconds.
WK 8 B4
GB │ IE
 25

Publicité

Table des Matières
loading

Table des Matières