Time & date
Here you can set the date and time, the time format (12/24 hr) as
well as the date format (DD/MM/YYYY, YYYY/MM/DD or MM/
DD/YYYY).
♦
Use the
/
the selected value with the
Confirm your settings with the OK button. Afterwards, press the
♦
MENU button to close this sub-menu.
Photo stamp
Here you can choose whether to save your photos with a time
stamp. You can choose whether the stamp consists of the time and
date (default setting) or just the date. If a stamp has been saved, the
current moon phase and the ambient temperature in degrees Celsius
(°C) and degrees Fahrenheit (°F) are also automatically saved.
Password protection
Select "Off" if you do not want to use a password to protect the
camera from unwanted access. Select "On" if you want to protect
the camera from unwanted access. You must enter a password in
the on-screen menu that then appears. The password must be ten
characters long and must contain at least one upper and lower case
letter, one number and one special character:
♦
Press the
/
♦
Then switch to the next field using the
♦
Repeat the steps described above to set all ten characters.
■
30
│
GB │ IE
buttons to switch between the values and change
/
Set password
buttons to select characters.
buttons.
button.
WK 8 B4