Handling And Operating The Camera; Switching On And Off, Changing Settings - Kompernass WK 8 B4 Mode D'emploi

Handling and operating the camera

In this chapter you will receive important information about proper
handling and operation of the device.
Switching on and off, changing settings
After connecting a power supply, move the mode selector switch z
to the "TEST" position:
NOTE
► When using the appliance for the first time, press the
buttons to select a menu language and confirm your selec-
tion with the OK button.
You need to enter a password to prevent unauthorised access to the
camera. The password must be ten characters long and must contain
at least one upper and lower case letter, one number and one
special character.
♦ Press the /
♦ Then switch to the next field using the
♦ Repeat the steps described above to set all ten characters.
Confirm your selection with the OK button.
♦
NOTE
► You can find more information under the menu item "Password
protection".
■ 22 │ GB │ IE
Set password
buttons to select characters.
button.
WK 8 B4
/