Resetting The Adjustments; Specifications - Dell UltraScan 1600HS Guide De L'utilisateur

Customizing Your Monitor

Resetting the Adjustments

Resetting a specific adjustment:
1 Press the MENU button to display the MENU OSD
2 Highlight the OSD containing the adjustment you want to
reset using the BRIGHTNESS and CONTRAST buttons and
press the MENU button again.
3 Press the ¨ (BRIGHTNESS) ./> buttons to select the
adjustment you want to reset.
4 Press the (RESET) button to reset this specific
adjustment.
Resetting all of the adjustments for
the current input signal
While there is no OSD displayed, press the
button.
All of the adjustments for the current input signal are reset to
the factory settings.
Adjustments not affected by changes in the input signal (such
as OSD language, OSD position, input signal selection, Power
Saving delay time and the Control Lock function) are not reset
to the factory settings.
Resetting all of the adjustments for
all input signals
Press and hold the (RESET) button for more than two
seconds.
All of the adjustments, including the brightness and contrast,
are reset to the factory settings.
Technical Features

Specifications

Picture tube
Phosphor Type
Transmission Ratio
Faceplate
Viewable image size
Resolution
Horizontal
Vertical
Display picture size
(RESET)
Input signal
Video
Sync
Deflection frequency
Horizontal
Vertical
AC input voltage/current
Inrush current
Power consumption
Maximum
Nominal
Dimensions
Net weight
Shipping weight
Environmental Temperature
Operating
Non-operating
Environmental Humidity
Operating
Non-operating
Design and specifications are subject to change without notice.
Getting Started
0.25 - 0.27 mm aperture grill pitch,
21 inches measured diagonally,
90 degree deflection
P22
Approx. 39%
Anti Reflective (AR)/Anti Static
(AS) coating
Approx. 403.8 × 302.2 mm (w/h)
(16 × 12 in.) 19.8" viewing image
Max. 1600 dots
Max. 1200 lines
Approx. 388 × 291 mm (w/h)
× 11
(15 3 / 1 / in.)
8 2
or
Approx. 364 × 291 mm (w/h)
× 11
3 1
(14 / / in.)
8 2
Analog RGB (75 Ω typical)
0.7 Vp-p, Positive
External HD/VD, Composite
Polarity Free TTL
Video Composite (Sync on green)
0.3 Vp-p, Negative
30 to 107 kHz
48 to 160 Hz
100 to 240 V, 50 – 60 Hz, 2.0 – 1.0 A
120 VAC/50 A
240 VAC/80 A
160 W
120 W, 409 BTU/h
498 × 505 × 474 mm (w/h/d)
× 20 × 18
(19 5 / 3 /
8
Approx. 31 kg (68 lb 5 oz)
37 kg (81 lb 9 oz)
10˚ to 40˚ C (50˚ to 104˚ F)
0˚ to 60˚ C (32˚ to 140˚ F)
10% to 80% (Non-condensing)
5% to 90% (Non-condensing)
EN
F
ES
D
J
C s
C t
PL
in.)
4
11