Atmospheric Conditions Display - Leica RANGEMASTER 2800.COM Notice D'utilisation

ATMOSPHERIC CONDITIONS DISPLAY

1 5
1 0 3 0
To accurately calculate the point of impact (see
following section), the Leica Rangemaster also
determines three crucial pieces of additional
information during the range measurement:
– the inclination of the unit
– temperature
– atmospheric pressure
Current values can be displayed at any time.
Press the secondary button
• The reticule appears briefl y (if distance measure-
27 C
ment was not previously activated) and then the
following items appear in succession for around 2 s
each instead of the range:
– inclination (indicated by an additional angle symbol)
– temperature
– atmospheric pressure
Note
If the housing of the Leica Rangemaster initially has a
signifi cantly diff erent temperature than the surround-
ings, for example when moving from inside to outside,
it can take up to 30 minutes before the internal sensor
can display the correct ambient temperature again.
1
briefl y 1x.
EN
47