Range Measurement - Leica RANGEMASTER 2800.COM Notice D'utilisation

EN

RANGE MEASUREMENT

Aim directly at an object to measure its distance.
Proceed as follows:
Press the main button 2.
1.
• This switches on the device.
• The reticule appears.
The reticule remains lit for another 6 s after you release
the main button. The reticule remains lit continuously
while the button is pressed and held.
44
2. Aim at the object while the reticule is lit.
3. Press the main button again.
• The reticule disappears briefl y during the
• The measured value is displayed.
You can do another measurement at any time by
pressing the main button while the reticule remains lit.
9 8
- - - - - -
– the distance to the object is less than 10 yards, or
– the range is exceeded or
– the object is not suffi ciently refl ective.
The Leica Rangemaster powers down automatically
after a few seconds.
measurement.
appears, if