Setting The Zeroing Distance (Sid) 5; Ballistic Output Formats (Abc Tm ) - Leica RANGEMASTER 2800.COM Notice D'utilisation

SETTING THE ZEROING DISTANCE (
Start with step 1 if you have not previously opened the
menu control, or with step 3 if you have just set the
ballistic curve and is still flashing in the display.
SId
1. Press and hold the secondary button
• appears.
EU.US
2. Press the secondary button briefly 3x (<2 s).
The display will switch from
3. By pressing the main button
the desired zeroing distance.
– [m],
100
– [m] or
200
– [m] or
GEE
– [y] or
100
– [y] or
200
– [y].
300
4. Save your setting by briefly pressing the
secondary button.
• The saved setting is initially lit continuously for
4 s as confirmation, then the display switches
to and then disappears.
AbC
)
SId
1
(≥3 s).
and to SId.
bALL
bt bt
2
repeatedly, select
BALLISTIC OUTPUT FORMATS (
The advanced ballistic compensation (AbC) on the Leica
Rangemaster allows you to display one of the following
three ballistic values after the measured range if
required:
– the equivalent horizontal range (EHr)
– the corresponding holdover (HOLd)
– the number of clicks required on the rapid reticle
adjustment (MOA/clicks)
Both the displayed holdover and
a. the measured range to the target
b. the angle of inclination of the weapon
c. the ballistic curve set,
d. the zeroing distance set
)
TM
ABC
values factor in:
EHr
EN
51